Ekto Manufacturing Corporation was formed in 1968 by engineers previously involved in design and construction of military shelters. The design of EKTO lightweight, highly insulated enclosure was originally developed by them for the military for worldwide deployment.

The basic construction consists of vacuum epoxy laminated shelter panels, using aluminum or fiberglass face skins separated by structural foam. This configuration along with structural members embedded within the core provides a highly efficient panel structure for light weight, insulation and stiffness properties. Panels are fastened together by corner angles and corner weldments. Openings are framed either precut or easily cut out after assembly. Due to the high insulation factor of the structure, air conditioning and heating loads are minimized.

Materials for the shelter are selected for intended use and exposure specifications. Aluminum alloys are chosen for much application. Severe caustic climate conditions may require fiberglass panel skins with stainless steel trim and fasteners. Doors are made of the same construction as the shelter and fully gasketed to obtain an air and rain tight enclosure. The supplied skids and lift/tie down rings facilitate handling by forklift, crane, and rotary or winged aircrafts.

The Shelters are designed and structurally analyzed by structural engineers to meet the applicable requirements of numerous codes, such as UBC, SBCC, etc. Electrical installation conforms to the latest issue of the NEC, CSA, IEC or other applicable foreign codes.

We will be pleased to help you select the appropriate equipment enclosure for your next requirement.